XRF Calibration Standards: options for coating thickness measurements

Utilizing quality reference standards is critical to maximizing the performance of many x-ray fluorescence analyzers.  While offered for many applications (RoHS testing, geological interests, petrochemical analysis, etc) a majority of reference standards that the in-house XRF standards laboratory of Eastern Applied develops are for coating thickness measurement applications.

When it comes to purchasing XRF calibration standards for thickness analysis you should know what type of format you are seeking as there are two styles to choose from: plated or foil.  Both are commonly used throughout industry and provide reliable results.  When determining the best fit for you consideration must be made to the model of XRF analyzer the standards will be used on, constituents of interest and target thicknesses, whether the calibration curve will be created with or without use of fundamental parameters (FP) and how the reference materials will be used.

Foil-XRF-Reference-StandardFoil Standards: this style is created with the foil of desired material and thickness attached to a stainless steel foil holder.  The foil is then temporarily secured on top of a plastic chip containing the desired base material.  When a range of thicknesses are required, the user will have several foils of difference thicknesses to span the desired range.

Pros of Foil:
–   Versatility: foil standards can be placed over any desired substrate, thereby increasing the range of applications
–   Multi-Layer Flexibility: they are generally stacked on top of one another for a reliable method of multi-layer analysis.  A common question regarding stacking foils is whether or not the air gaps influence results – the answer is no; any air gaps are so small that they are negligible in the thickness reading.
–   Usable Curves: when using stacked foils for multi-layer analysis there are essentially three useful calibration curves, two single layer curves and one multi-layer curve.  By nature, one of the single layers is the first plated layer and can be used to monitor the plating in-process.

Cons to Foil:
–   Fragile: while more versatile, the foils themselves are fragile and must be handled with care to avoid punctures.  Generally speaking, foil standards are not ideal for everyday use or in environments where they might come into contact with a lot of dirt as they cannot be cleaned.

Plated-XRF-StandardsPlated Standards:  these are created by electroplating the desired material of specific thickness onto a permanent base material.  When a range of standards is required, the user will have standard pieces of several different thicknesses to span the desired calibration range (layers and base material in one piece for each thickness).

Plated Standard Pros:
–   Durability: compared with foil pieces, plated standards tend to be more durable and tolerate heavy handling.  However, they are still prone to damage when the measured surface comes into contact with an object that scratches it.  Even the user touching the surface can cause damage due to the dirt from the environment or oils on a user’s hands.
–   Extended Life: fortunately, if scratches or damages do occur on a plated standard, all is not lost.  In most cases, the standard can be polished with a fine grit polish and remarked to reflect the new, lower, value.

Cons to Plated:
–   No Versatility: with the coating permanently fixed onto a base material, a user will need to have a different plated standard for each thickness and base material combination they require.
–   Potential Variation: it is well documented that certain plated metals such as lead, gold, silver and tin (to name a few) will migrate over time; thus potentially changing the thickness of the reference material.  This change takes a long time but can easily be monitored by having reference standards certified yearly by an accredited laboratory.

XRF Standards DiscussionThese are just a few thoughts to help you begin the discussion with Eastern Applied Research’s standards laboratory when it is time to purchase new reference standards.  Request a phone call or email by a lab technician to discuss further.

Summary
XRF Calibration Standards: options for coating thickness measurements
Article Name
XRF Calibration Standards: options for coating thickness measurements
Description
XRF Calibration Standards for coating thickness quality control can come as plated or foil, the best style depends on the analyzer, the number of applications, and how calibrations are added
Author
Publisher Name
Eastern Applied Research Inc.
Publisher Logo

Comments are closed.